Aviation and Aerospace Component Manufacturing in Czechia

Lom Praha S.P

LOM PRAHA is one of the world‘s leading companies offering complex services for Mil helicopters and L-39 aircrafts. Our experienced staff is able to provide a whole range of services starting from helicopter acquisition support, through ground and flight crews training to all levels of helicopter maintenance works including general overhauls, modernizations and upgrades. We focus mainly on providing complex operation solutions for Mi-2, Mi-8/17, Mi-24/35 helicopters and their equipment (turboshaft engines, gearboxes and auxiliary power units) and overhauls of engines AI25-TL/AI25-TLM and selected aggregates used in the L-39 aircraft. In addition to that the company produces and overhauls aerobatic piston engines M132, M332, M137 and M337 used typically in Zlin aircrafts (Z326,Z526, Z43, Z142), L-200 Morava, L-40 Metasokol and many replicas of historical airplanes. Since 2014 LOM PRAHA has been operating the civil airport Přerov (LKPO) And since 2024 it operates the civil airport Líně (LKLN) VR GROUP, a.s, a subsidiary company, is a state of the art in simulation technology, for both, ground forces and aviation. Services/products include- Helicopter life cycle support (MRO, Modernizations, Acquisitions, Spare parts, In-operation support)- Rotary and fixed wing Training (Enstrom-480B, Mi-17, L-39, L-410, Z-142, Simulated training, Maitenance training)- Tactical Simulated Training (JAS-39, L-159, L-39)- Simulation technologies Development & Production (Flight & Ground Sim.)- Applied research and development - Piston engines Production & MRO - Airports

501 to 1000 staff

Mejzlik Propellers

Since 1974 we’ve been developing and manufacturing the highest quality propellers. We’re not just another propeller manufacturer. We are your partners, working in close contact to achieve your goals, and will ensure your valuable platform will be safe during operation.

51 to 200 staff

Ng Aviation

NG AVIATION specializes in the Digital Transition of the Civil & Military Aviation Industry. Cooperating with key international partners, NG Aviation offers a spectrum of services and solutions that provide comprehensive digital solutions, transforming the industry's information management and data exchange while fulfilling international regulatory compliance. NG AVIATION gives all aviation stakeholders the possibility to speak the common language, share common information, use a single platform to enhance operations, improve data management, and, most importantly, use the available data to benefit the industry's performance.

11 to 50 staff

Cirrus Aircraft Cz

We run on Cirrus Aircraft DNA - Safety, Performance, Style and Comfort.

1 to 10 staff

Air Team

AIR TEAM has been a beacon of innovation and transformation in the aviation industry. Initially building its reputation as a reliable supplier for pilots, pilot schools, aircraft services, and OEMs, AIR TEAM has steadily expanded its horizons. By 2015, the company had branched out into two new divisions: AIR TEAM service and AIR TEAM defense. The former, operating under EASA Part 145 certification, specializes in avionics integration, modifications, upgrades, and installation services. The latter is dedicated to ISR & special mission projects for police, armed forces, and international arms trade. AIR TEAM has consistently been at the forefront of evolving market trends and technological advancements. This is evident in its pioneering of multi-language/currency e-commerce solutions tailored for the European market, significantly bridging the gap between manufacturers and users. Today, AIR TEAM stands as a major European distributor of pilot supplies and aircraft parts, an EASA certified avionics integration provider, and a prime contractor for government ISR & special mission projects. With a client base exceeding across more than 25 countries, the company is a testament to enduring excellence in the aviation sector. Through a combination of unmatched experience, extensive aviation segment capabilities, and collaborative research with technical universities, AIR TEAM not only enhances mission effectiveness for its clients but also drives performance to new heights.

11 to 50 staff

Aeropace&defense Solutions

We're professionals We do things which we understand. We run projects in collaboration with excellent external experts. Not plunging headfirst into adventures, we purposefully search for new challenges. Our primary domain is an area of special and aviation equipment and software. Our experts have been engaged in this discipline since 1993, originally in other companies and organisations. In 2015 we have started to pursue special trainings and drills in the field of IT safety, including SCADA safety and various seminars for users travelling with sensitive data. Another area that we cover is the development of services based on software, call centres and remote support. Our services will help you meet legal requirements for trade with sensitive or controlled commodities and services.

1 to 10 staff

Czech Aerospace Research Centre Vzlu

Czech Aerospace Research Centre (VZLU)(established 1922) is a national center for research, development and testing in aeronautics and space. Its mission is to provide scientific support and create innovative solutions that can be applied in industry.

201 to 500 staff

Czech Aerospace Cluster

The CZECH AEROSPACE Cluster was established in 2010 as an association of aircraft companies having as a join objective the development of competitive aircraft industry. The Cluster acts in the region of south-eastern Moravia and the center of its activities is located in Kunovice where its important member companies have their place of business, i.e. 5M, Aircraft Industries and Evektor. The Cluster consists of 53 industrial companies, aviation services companies and technical universities. More than people work in the participating companies. The overall turnover for the year 2020 exceeded € 400 mil. Our Vision The vision which Cluster strives to accomplish is integration of production, development and research activities of individual members and creation of a complex offer for cooperation. Activity Czech Aerospace firms have gradually become specialists which, thanks to their development teams and unique solutions, reach the top of aviation sector. Czech Aerospace firms welcome systematic development in cooperation with the aim of jointly resolving problems and finding new solutions for strengthening the aerospace industry worldwide and supporting intercontinental air transport. Association of companies from the area of aircraft industry and creation of a comprehensive offer of research and development activities as well as production capabilities (airframe design, avionics, composite materials) Development and production of the aircraft family for 2-4, 8-14 and 14-20 passengers in commuter, normal, LSA, UL and UAV categories, including all accessories, systems and avionics

1001 to 5000 staff

Woodcomp Propellers

The Development, Production and Testing of aircraft propellers

11 to 50 staff

Robodrone Industries S.R.O

Robodrone Industries s.r.o is based in the South-Moravian Innovation Center, Brno, Czech Republic. In collaboration with the Institute of Aerospace Engineering, Faculty of Mechanical Engineering (FME) of the Brno University of Technology we develop and design Unmanned Aerial Vehicles, also known as drones. The company is currently focused on development and production of large payload Unmanned Aerial System platform, including user-friendly, intelligent navigation and communication systems and cloud-based services.

11 to 50 staff

Aviation Service, A.S

11 to 50 staff

Skyservice

We are a skydiving and aviation company based in the center of Prague with more than 10 years of experience and thousand satisfied clients Annualy. We offer tandem jumps, AAF courses, sightseeing flights, ait traffic and more."Only skydivers know why the birds sing"

11 to 50 staff

Dova Aircraft S.R.O

DOVA Aircraft company is ultralight manufacture company based in Paskov – the Czech Republic. The company was founded in 2006 however the tradition with production of ultralight aircrafts goes much further under the name DOVA a.s. Guided by knowledge – inspired by the vision Dova Aicraft is developing and producing safe, reliable and high quality aircrafts.

1 to 10 staff

Stein Seal Czech S.R.O

Stein Seal Czech s.r.o. is a subsidiary of Stein Seal Company (USA) Stein Seal Company is engaged in the design, development, testing and manufacturing of sophisticated mechanical shaft seals used in the aerospace, nuclear, chemical, petrochemical, and marine industries. Surpassing our customers' expectations by setting the highest standards for design proficiency and originality, constantly investigating new materials and processes, and refining our ability to manufacture to rigorous tolerances has made us the premier supplier of complex mechanical seal systems and specialty machined components.

11 to 50 staff

Aveoengineering Group

Aviation Electronics & Avionics Manufacturer and Engineering Design Firm, providing LED aircraft exterior and interior lighting products, aviation obstruction lights, composite hangar doors, LED marine lights, LED architectural lights, and contract design services, along with the DigitalFlightDeck advanced touchscreen avionics suite for general aviation aircraft. Subsidiaries wholly-owned in Slovakia, Malaysia, Florida USA. Headquarters in Czech Republic.

201 to 500 staff

Aero Vodochody Aerospace A.S

AERO Vodochody AEROSPACE a.s. focuses on the development, production, maintenance and modernisation of civil and military aircraft and is the largest aircraft manufacturer in the Czech Republic and one of the oldest aircraft manufacturers in the world. In the field of its own aircraft, Aero is a long-standing partner to a number of military air forces and has a strong position in the market for military training and light combat aircraft. With aircraft manufactured over a hundred years of existence, hundreds of L-39 Albatros aircraft still in service with dozens of military operators and a number of demo teams, and especially thanks to its new L-39 Skyfox aircraft, Aero is establishing itself as a reliable partner in the jet trainer segment. In the field of civil aviation, Aero cooperates with major aircraft manufacturers on a wide range of projects and is a partner in several risk-sharing programmes, where it is responsible not only for the production and assembly of aircraft components, but also for their development.

1001 to 5000 staff

Eldis Pardubice, S.R.O

ELDIS Pardubice, s.r.o. is the best Czech producer and OEM manufacturer of active radar systems. The company scores worldwide in the area of Air Traffic Control and Air Defence and is dedicated to developing, manufacturing and managing state of the art radar systems and technologies. Company ELDIS Pardubice, s. r. o. is member of industrial-technological group CSG and its division CSG Aerospace.

201 to 500 staff

Tc Inter-Informatics A.S

TC INTER-INFORMATICS a.s. offers engineering and design services in the field of aerospace, railway vehicles and machinery. Inter-Informatics has been operating on international markets since 1994 and has grow into a group of companies, today working with more than 100 highly qualified employees in various countries as close as possible to current customers. Vision & Mission As partners of our customers, we always aim to provide expertise, innovation and reliability of the very highest level, thereby striving to offer effective solutions for any requirement or problem to the customer’s complete satisfaction. Pursuing these goals, our aim is an ongoing improvement in all fields of operation, with an innovative and cost-saving approach; acceleration of internal processes and a long-term human resources policy, focused on highly-professional employees and their career development.

51 to 200 staff

Mesit

MESIT vyvíjí a vyrábí vysoce specializované výrobky a systémy. Jejich kvalita je prověřena v těch nejnáročnějších oborech, jako je letectví či vojenský průmysl. V současnosti je v našem týmu 400 vysokoškolsky vzdělaných odborníků. Vývojáři se opírají o tým vysoce odborně připravených specialistů, kteří s využitím nejmodernějších technologií dávají jejich myšlenkám život. Specializovaná výroba a testování je druhý pilíř, na kterém koncern MESIT pevně stojí více než sedmdesát let.

501 to 1000 staff

Pbs Velka Bites

PBS Velka Bites (PBS) is a member of PBS GROUP - a stable, high quality and innovative engineering company that has been active in the field of high precision engineering for over 200 years. The key sector for PBS is aerospace engineering: in-house development, production, testing and certification of small turbojet, turboprop and turboshaft engines, auxiliary power units (APU) and environmental control systems (ECS). The PBS manufacturing program also includes precision casting, precision machining, surface treatment and cryogenics – helium turboexpanders or cascades of low-temperature compresors. PBS is a holder of Design Organisation Approval (DOA), Production Organisation Approval (POA), and Maintenance Organisation Approval (MOA) issued by the European Aviation Safety Agency (EASA). PBS quality management system is certified in accordance with ISO 9001, AS 9100, ISO 14001 and NADCAP Our customers appreciate especially the high technical standard, reliability and quality of our products and services. AEROSPACE TECHNOLOGY - Turbine engines - Turbojet, Turboprop and Tusboschaft - Auxiliary power units - Environmental control systems - Aviation devices and engine components INVESTMENT CASTING - Turbine wheels - Turbine blades and gas turbine segments - Aircraft engine impellers and guide wheels - Spinner discs - Femoral components CRYOGENIC TECHNOLOGY - Turboexpanders - Compressors - Pumps SURFACE TREATMENT - Anodizing - Coating - Tinning - Blackening PRODUCTION TECHNOLOGIES - Electrical discharge machining - Metallurgical material cutting - Grinding and inspection of gears - Turbine blade coating - Heat treatment and brazing in a vacuum furnace

501 to 1000 staff

Aircraft Industries, A.S

We are a company with over eighty years of tradition in aviation manufacturing, currently engaged in the development, production, sales, and servicing of L 410 aircraft. We are deeply involved in research and development and offer partnerships to companies in various fields. We operate the international airport in Kunovice and establish the Secondary School of Aviation. We are the largest manufacturer of transport aircraft in the Czech Republic, exporting to 60 countries worldwide.

501 to 1000 staff

Pbs Group A.S

PBS Group, a.s. is an engineering company group which globally operates in the fields of aerospace, power engineering, investment casting and cryogenics. Over 200 years we place emphasis on flexibility and quality of our products and services. We are aware that future depends on innovations. Therefore, we constantly invest in research and development in our production plants in the Czech Republic, European Union.

501 to 1000 staff

Airmobis

AIRMOBIS, European engineering and design office portfolio is split into 3 major areas: 1. High-end solutions for aircraft and drones' aerodynamic and design 2. Representative of French company Nexeya products 3. Development of Condor VTOL technology, applicable from drone size up to general aviation aircraft

1 to 10 staff

Ctu Space Research

CTU Space Research is a student team at Faculty of Mechanical Engineering, CTU in Prague. We develop, build and test space technologies. Our vision is to help students grow and therefore boost this industry in the Czech Republic.

11 to 50 staff

Era A.S

ERA a.s.(the member of OMNIPOL group) is a leading company in multilateration, multistatic surveillance, and reconnaissance technology. Unrivalled experience in passive surveillance sensor development provides ERA with unique know-how to deliver comprehensive solutions for global markets. We develop, manufacture and implement mission-critical systems for military and civil purposes. Over last 2 decades ERA has reached number of more than 100 installations, deployed in over 60 countries on 5 continents with 24/7 operations fulfilling demanding customer requirements. Nevertheless, more important that given number of references is the experience we have achieved and lessons learnt during implementation of our solutions for air traffic control and management. ERA has developed unique passive surveillance system VERA-NG that defines new sensor category DPET (Deployable Passive ESM Tracker) tailored for air, maritime and land target surveillance and reconnaissance for defence and electronic warfare purposes. In parallel, ERA made air traffic control history when deployed the first multilateration system and introduced gate-to-gate surveillance. We intend to continue introducing new technologies to adapt to today´s and tomorrow´s challenges.

201 to 500 staff

Evektor

Evektor is focused on automotive and aerospace industry activities in development, design and engineering subassemblies and assemblies, prototypes manufacturing, testing, certification and start of serial production. Aircraft activities also include modifications, repairs, engine installation, interiors including changes and activities which are necessary for type and supplementary certification. In practice, we usually frequently transfer construction principles from aircraft design to non-aircraft construction of road and transport vehicles and general engineering.

201 to 500 staff

Groundcom

Groundcom builds and operates a worldwide network of ground stations providing a connectivity for satellite operators.

1 to 10 staff

Tc Inter - Informatics A.S

At Inter-Informatics, we are passionate about engineering. And we strive to show it in our services. As your partner, we bring you the best solution needed for any requested business or technical case. DoA with Part 21J for A1/A2 aircrafts. Our primary focus is in Aerospace, Rail, Machinery. And our added value for these fields lies in three principles - expertise, innovation and reliability. Expertise Focus on specific expertise in our three branches allows us to provide our customers with complete design services, incl. analyses, tech. documentation and outsourced manufacturing in one turnkey solution. Innovation Sharing and improving know-how between the IIG design teams builds synergy that leads to customer savings and outstanding technical solutions. Reliability Successful projects and long-term relationships with leading companies on the international market clearly demonstrate our flexibility and reliability.

51 to 200 staff

Czech Rocket Society

Czech students working on rockets

11 to 50 staff

Licrit

LICRIT specializes in the development of systems where criticality matters, serving the aviation, space, functional safety, and railway industries. Our mission is to build a safer and better world by delivering state-of-the-art mission-critical and life-critical electronics solutions. We achieve this by combining deep technical expertise with practical certification know-how to provide turnkey software certification, safety-critical engineering services, and senior consulting, tailored to each project. LICRIT guides customers through the full complexity of safety-critical development—from early prototyping and gap analysis to certification readiness and authority interaction. Our teams operate within strict regulatory frameworks and are equipped with trained engineers, proven processes, and ready-to-use toolchains, enabling seamless integration into customer programs. We are an AS9100-certified supplier of DO-178C software development, certification support, consulting, and training. LICRIT is your trusted partner for turnkey certification and safety-critical engineering—when criticality matters.

1 to 10 staff

5m Levit S.R.O

Společnost 5M LEVIT poskytuje svým zákazníkům služby v oblasti výpočtů a simulací a pomáhá jim tak při vývoji jejich výrobků. Využíváme letitých zkušeností z leteckého průmyslu a uplatňujeme je v dopravní technice, při návrhu strojů a strojních zařízení, při konstrukci a průkazu zábavní techniky nebo při stavbách s kombinací kovů a skla. Navštivte nás v našich nových prostorách v Inoparku! MINAS INNOVATION PARK Zerzavice 2146 Staré Město u Uherského Hradiště

1 to 10 staff

Zlin Aero A.S

The Czech company ZLIN AIRCRAFT a. s. continues the tradition of the Zlínská Letecká company, founded in 1934 by Tomas Bata. Since then, thousands of aircraft have been produced in the factory at Otrokovice. The company specializes in the production of aerobatic training aircraft, and multi-purpose aircraft which are mainly for military and government use. Zlin offers the two-seat aerobatic Z 242L aircraft, and the two to four-seat model Z 143LSi aircraft. These products are the subject of ongoing innovation processes in order to meet the specific requirements of its customers. Additionally, ZLIN AIRCRAFT a. s. has a long tradition in the production of aircraft wheels, brakes and ejection seats, as well the production of spare parts and aircraft components for a wide range of clients. The company provides maintenance and assistance services and of course training packages for pilots and maintenance. ZLIN AIRCRAFT a. s. is the holder of all necessary quality certificates ISO 9001, EASA, FAA and other institutions, including certificates for military production.

51 to 200 staff

Dogfight Boss

We are developers and manufacturers of the most advanced and innovative flight and vehicle simulators for professionals.#Dogfightboss #DFB

11 to 50 staff

Dronpro

Letecká škola pro piloty dronů, e-shop s drony a příslušenstvím. Půjčovna dronů, pojištění dronů a natáčení z ptačí perspektivy na zakázku.

11 to 50 staff

Hph Sailplanes

HpH Ltd. is a company long established in the aviation industry. Having been involved with initial construction of the Diamond Dimona, Katana, and more recently the mighty EB29, HpH have gained a reputation for exceptional engineering build quality and attention to detail. In 1997, the HPH company succeeded in gaining the technology and production documentation for the original Glasflügel 304. Production started in 1997 with an updated version of the Glasflügel 304, the HpH 304CZ, which proved very successful both with customers and in competitions. After that, HpH filled a gap in the market producing the HpH304C Wasp, an inexpensive FAI Standard Class version of the 304CZ and both models are highly praised in the gliding community. HPH have taken all of this knowledge, design & manufacturing know-how to produce a highly competitive sailplane with the »all-new« HpH Shark series. Introducing new dimensions to gliding, and producing a refreshing alternative to the established competition, HPH have already shipped over 70 Shark gliders to customers worldwide, including North America, Canada, Australia and throughout Europe.

11 to 50 staff

Aviasport S.R.O

We are company which provides to our clients exclusive sale of aircrafts, help in purchase, renting of our aircrafts or professional consultation in aviation. Aviasport is focused on the General aviation, Light sport aircraft or microlight. We are able to provide also offer of aircrafts for commercial transport or certified aircraft parts. Thanks to a wide range of contacts all around the word and long term experience in aviation and in international business we are able to provide the best offer for your demands in very short time. Jsme společnost, která se zabývá exkluzivním prodejem letadel, pronájmem letadel a poradenstvím. Specializujeme se na letadla všeobechného letectví, letadla LSA a UL. Jsme schopni zajistit také nabídku letadel pro obchodní dopravu a letecké díly. Díky širokému spektru kontaktů po celém světě a dlouholetou zkušeností v letectví a v mezinárodním obchodě jsme schopni zajistit bezkonkurenční nabídky pro Vaše poptávky ve velmi rychlém čase a za tu nejlepší možnou cenu.

1 to 10 staff

Blanik Aircraft Cz

Blanik Aircraft CZ is a company with more than 50 years of history in aviation industry. While keeping the life cycle support of world-famous Blanik Gliders, Blanik Aircraft CZ manufactures a wide range of products, such a Landing Gear Systems & Hydraulics, Control Systems and various metal parts.

51 to 200 staff

Jamcopters

JAMCOPTERS is the leading company in the Czech Republic that offer complex aerial services using unmanned aerial vehicles (UAVs).

1 to 10 staff

Sab Aerospace Cz

S.A.B. Aerospace is Czech private SME. Our core businessiness is focusing on the development of Mechanical Sub System for Launcher, Satellites and Payloads (Earth Observation and Microgravity). SAB has consolidated its primary role in the VEGA program, with system responsibility for the development of the VEGA SSMS Dispenser (Small Spacecraft Mission Service). Assembly and integration activities are performed in the new ISO 8 Integration Facility created by SAB in the Brno Technology Park. Competences & Capabilities PROJECT OFFICE • Project Management • System Engineering • Product Assurance ENGINEERING • Mechanical Design (3D CAD Modeling) • Structural Analysis • Thermal Analysis • Multibody Dynamics Analysis (e.g. Mechanism Engineering) SERVICES • MANUFACTURING • Machined Parts (outsourced) • Composite Parts (outsourced) • ASSEMBLY/INTEGRATION AND QUALIFICATION activities performed by certified operators: • Internally in clean room Class (e.g. Assembly Integration of Flight HW internally developed) • By the customer ( e.g. EDRS-C panel integration and alignment at OHB System premises) • Vibration and Shock Testing (using external facility) • TVAC Testing (using an external facility) Space Related Equipment, Labs & Certificates The new facility created by SAB in Brno includes one production area for electronics, one clean storage and one Integration hall for mechanical systems AIT. Facility characteristics: • Clean Room ISO 8 • Usable surface 600 sqm • Usable height 6 m • Equipped with 2 ton Lifting crane SAB Aerospace s.r.o. is certified ISO 9001:2009.

11 to 50 staff

Strafos

Smart solution for business aviation.

1 to 10 staff

Upvision

UpVision provide top-tier airspace management and access services for drone operators. We simplify the complex issue of safe navigation and the integration of drones into business applications and public sector services. We develop technologies that facilitate data sharing between unmanned systems, manned systems, and airspace management. Our focus is on innovative safety concepts, a high level of automation using the latest technologies, and advanced operational procedures. We are a member of the European U-space Stakeholders Network and participate in a number of prestigious international and domestic research projects focused on applied research, validation of selected technologies, and operational procedures for U-space and drones. Part of CSG Aerospace.

1 to 10 staff

Esa Bic Czech Republic

As a business incubator, we focus on the incubation and development of technologically progressive startups that use space technologies or systems in their commercial products or services. The incubator is operated by the CzechInvest Agency. The aim is to support the use of space technologies in everyday life and thus ensure the support of research, development and innovation and the monetization of their results. For 5 years, up to 25 Czech startups will have the opportunity to seek the use of space technology in everyday life on Earth. Main partners: ESA, CzechInvest, Hl. City of Prague, Ministry of Industry and Trade, Ministry of Transport

1 to 10 staff

Fiala Prop S.R.O

Producer of 4-stroke motors and wooden propellers. Divisions- Propellers - Motors - UAV

11 to 50 staff

Skyfalcons Ltd

SkyFalcons is an established company that involves a group of passionate pilots from different sectors within the aviation industry, working on a daily basis to provide you with the best service. We understand that the market in aviation may be complicated, that is why, we strive to keep matters as flexible as possible and reach a point of common ground between all parties involved, including firms and individuals. Our goal is to find a suitable bird that meets our customers’ criteria, as well as many other related services. You may contact us to schedule a free aviation consultation! We will be happy to assist you at any time.

1 to 10 staff

Spoluworks

Precise machining of complex parts with the highest process requirements & mechanical assembly. Our components fly in the most popular passenger airplanes or drive on Mars in the MarsRover. We are experts in creating components for the following industries: Medical, Aerospace, Fluid motion control, Turbochargers, Power generation, Global manufacturing of machine tools, and Laser machines. WHY CHOOSE SPOLUWORKS: 1. Thoroughly digitalized manufacturing process, significantly improving our supplies' reliability, repeatability, and flexibility. Ability to serve as a one-stop-shop- long-term business partner for heat & surface treatments with all necessary certifications- close cooperation with two foundries with several NADCAP & OEM certifications to offer a one-stop-shop service: casting, machining, and assembly. SpoluWorks is certified to the AS/EN 9100 quality management standard for the aerospace industry. According to Supplier Quality Auditors of Premium Aerotec, SpoluWorks' equipment and abilities match their hi-tech suppliers. Proud member of CS STEEL Holding

11 to 50 staff

Aero Jobs Europe

Recruiters are invited to send through your relevant job openings for Pilots or Cabin Crew in Europe. If you wish to have job/advert pinned to the top page, this is also an option- A word of caution for those using this page - 1) This is to inform that the group/social media page/website herein is a free service that does not guarantee any interview/meeting/discussion with any employer basis any amount of initial monetary payment by the jobseeker. 2) AeroJobsEurope is not responsible for any frivolous email, sms and or phone call by any fraudulent person and or robot pretending to be part of aerojobseurope or its associates. 3) AeroJobsEurope will not ask you for any identifiable personal information nor ask for any fee pertaining to but not limited to, flight training, potential/guaranteed jobs, type ratings, interviews etc.

1 to 10 staff

Csg Aerospace

CSG Aerospace je divize skupiny Czechoslovak Group, která zastřešuje několik českých a slovenských společností působících v oboru leteckého průmyslu. Společnosti se svými produkty a službami vzájemně doplňují a nabízejí zákazníkům komplexní a profesionální řešení v mnoha oblastech civilního i bezpečnostního sektoru.

501 to 1000 staff

Czech Aircraft Group

Aircraft Design, Research & Development, Production of aircraft in LSA category with more then 80 years tradition. In-house Production A to Z The whole process from resarch and design to manufacturing and final assembly is done in-house at Cruiser aircraft, ensuring reliability, longevity and smooth operation. No third-party kits of questionable origins are used. We take great pride in knowing our aircraft inside out and overseeing the whole production process ourselves to ensure maximum quality. 11 Hours Certified Airframe With a proven lifetime of 11 flight hours, almost double the standard among Light Sport Aircraft, and based on the results of fatigue tests performed in very close cooperation with specialist from Brno University of Technology, Cruiser aircraft are one of the most durable planes on the market. Best Value on the Market Compared to average operating costs in general, Cruiser Aircraft offer great savings, while retaining their high reliability. Just look at the numbers: thanks to highly effective in-house development, easy and undemanding maintenance, very low number of life limited parts and no need for special airframe checks at the manufacturer, we have been able to cut the costs by a large margin. All over the world Cruiser aircraft are sold, operated and loved all over the world. This makes it easy to try them out, get spare parts and find support – wherever you happen to be.

11 to 50 staff